- •Thermal monitoring of low voltage switchgear using thermal ionization detector
- •An intelligent fault diagnosis method for electrical equipment using infrared images
- •The methods in infrared thermal imaging diagnosis technology of power equipment
- •B. Image Segmentation Methods
- •Condition Monitoring Tool for Electrical Equipment — Thermography
- •Equipment monitoring for temperature related failures using thermography cameras
- •About Thermal Stresses Monitoring and Diagnosis of Electrical Equipment
- •An Instrumentation System for Smart Monitoring of Surface Temperature
- •10. Electrical Contact Failure Detection Based on Dynamic Resistance Principle Component Analysis and rbf Neural Network
- •11. A Wireless and Passive Online Temperature Monitoring System for gis Based on Surface-Acoustic-Wave Sensor
- •12. Reliability assessment and field failure predictions – a prognostic model for separable electrical contacts
About Thermal Stresses Monitoring and Diagnosis of Electrical Equipment
According nowadays trend the paper presents different temperature measuring devices that are currently used to identify faults in the power system. It aims to highlight the importance of thermal stresses monitoring and diagnosis of electrical equipment. Also, this paper discusses the investigation of a three phase circuit breaker using the concept of infrared thermography (IRT) for monitoring and diagnosis its technical condition.
The heat is transferred in the constructive elements of the electrical equipment by conduction. The heat transfer direction it is always from hot to cold. The rate at which the conduction takes place depends on three factors:
material property named conductivity. Metals are highly conductive while insulators are not;
material thickness. Obviously, to reduce heat flow requires more material;
the temperature difference over the material. A big difference means more energy is transferred.
Currently there are various systems for temperature measurement that are contact type, such as thermocouples and resistance temperature detectors (RTD). Infrared thermography is relatively a new method that measures the temperature of equipment with no contact, remotely and which provides the thermal image of the entire equipment with its constructive elements.
Temperature measurement in current industrial environment contains a variety of needs and applications. To meet this large expectation of the industry process temperature measurement has developed a large number of sensors and devices to manage this demand. Thus, there are wide varieties of devices for measuring temperature according to the type of equipment investigated, or the accuracy with which it must be measured, or the utility of the temperature measured.
Temperature measuring devices can be divided into three general categories [5]:
thermometers;
temperature transducers;
infrared thermography investigation device.
Infrared thermography is a nonintrusive technique extremely effective in a quickly detection and exactly location of the electrical faults, [9]. Imperfect contact, loose or corroded can lead to produce excessive heating, or other type of faults manifested also by excessive overheating such as those due to:
under sizing the current paths within the electrical network;
under sizing of the electrical equipment (e.g. for distribution transformer with nominal power less than the power required by consumers);
excessive power flow leakage of a transformer tank walls;
excessive wearing of thermal protection envelope at some power plants (that envelope designated to limit energy loss and heat protection of the operating personnel).
Statistics indicate that the frequency of faults occurrence of the type manifested by excessive overheating, is approximately 1% in the high-voltage, but increases to 8-10% for low and medium voltage, [10].
All electrical equipment with a temperature above 0 Kelvin emits electromagnetic radiation in the infrared region of the electromagnetic spectrum.
A device that is using the concept IRT converts the signal from the detector grid, using an integrated circuit, into a signal that the human eye can understand. In this way, it can be interpret the image of the infrared radiation emitted by electrical equipment, having different wavelengths (temperatures), displayed as different color intensities [11].
Several types of detectors are available at the moment in the industry and can be divided into two categories: thermal detectors (such as pyrometers, bolometer etc.) and semiconductors (such as photoconductive cells, photovoltaic detector etc.).
Infrared detectors are generally positioned inside a protective housings and are composed by optical elements (lenses, mirrors etc.); detection elements, cooling systems and associated electronics. Often the devices which use IRT for measuring temperature are called infrared cameras. Such infrared cameras have undergone several changes over the last decade, [12]. The first generation of infrared cameras was made from a single sensing element and two scanning mirrors (one horizontal and one vertical).
The second generation was used two similar scanning mirrors with an array of detectors (either a large linear array or a small two-dimensional array). At the third generation of infrared cameras are not using any more he lenses and were using two-dimensional arrays of a large dimension for detectors (known as focal plane arrays). The modern generation of infrared cameras feature image enhancement techniques by compensating delays, this is leading to maximize resolution and sensitivity of the whole temperature measure system.
Due to the high currents occur increases of temperature values which can lead to damage of metallic or non-metallic components of the electrical equipment.
Controlling industrial processes is much easier when temperature is under surveillance. Identification of abnormal patterns of temperature and perform an on-line temperature measurement in a contactless manner infrared cameras helps to early diagnosis of probable faults and adopting appropriate preventive measures to avoid major stops.
The IRT can record the dynamic temperature variations in real-time. They can do a quick and easy color coding interpretation of infrared thermal image obtained. Thus, from the measured temperature values appropriate decisions can be made for maintenance activities.
The faults identified by infrared thermography are often compared with results obtained from other techniques, such as ultrasound control, vibration analysis, in order to ensure the reliability and accuracy of the monitoring system. Fig. 2 shows an application where is monitor the temperature status of a three-phase circuit breaker by IRT. The main advantages of this method of monitoring are that the temperature measurement is made remotely without physical contact with analyzed equipment and without interrupting the operation of the equipment. IRT allows interrogation of a small area, or maybe the whole of equipment examined.
When investigation occurred, the three-phase circuit breaker was under a tension of 0.4 kV and at a current load of 60% of the maximum permissible load.
After monitoring for 1 minute using the infrared camera, it can be notice that the phases L2 and L3 indicate a higher temperature than admissible temperature in the long term regime for contact zone. This is 90°C for circuit breaker contacts, as it can be seen in Table II, [3].
Table II shows the maximum admissible temperatures for long term regime of the different contact and conductor types of copper or aluminum, [6].
TABLE II. ADMISSIBLE TEMPERATURES FOR LONG TERM REGIME OF DIFFERENT CONTACT AND CONDUCTOR TYPES OF COPPER OR ALUMINUM
