Добавил:
Upload Опубликованный материал нарушает ваши авторские права? Сообщите нам.
Вуз: Предмет: Файл:
к_р_1_курс_2.doc
Скачиваний:
4
Добавлен:
01.07.2025
Размер:
410 Кб
Скачать
☆

4 These phrases are missing from description of the red-light camera system. Decide where they fit. Write a letter (a – l) in each space.

A as sensors

B on tall poles

C means of cables

D changes the magnetic field around the wire loops

E that a car has passed over the trigger

F the position of the car

G of four cameras, two triggers, and a computer

H to an electrical power source and a meter

I to take photographs of cars

J under the road near the stop line

K the distance between the two locations

L that it has stopped at the edge of the crossroads

Red-light camera system

A red-light camera system detects vehicles if they cross a red traffic light. The equipment consists (31)_____.

The cameras are located at the four corners of a crossroads. They are mounted (32)_____ , and point inwards towards the centre of the crossroads. The purpose of these cameras is (33)_____ which drive through a red light.

A trigger is a length of wire which is located (34)_____. The wire is laid out in two rectangular coils (called sensor loops), one above the other. Each trigger is connected (35)_____. The current through the wire from the power source generates a magnetic field. The triggers act (36)_____. They detect the location of a car, and send this information to the computer.

The computer is connected by (37)_____ to the cameras, the triggers and the traffic lights. The computer receives information from the traffic signal and the triggers, and sends it to the cameras.

How does the system work? When a car crosses a trigger, it (38)_____. The computer senses that the magnetic field has changed, and therefore it knows (39)_____.

There are usually two triggers. The first is at the stop line, and the second is in the middle of the crossroads. If a car activates both triggers, one after the other, the computer knows that a car has moved into the crossroads. If the car activates only the first trigger, the computer knows (40)_____.

When a car activates both triggers after the light is red, the camera automatically takes a picture, which shows (41)_____ as it passes the stop line. The camera then takes a second picture. This shows the location of the car in the centre of the crossroads. The computer calculates (42)_____. This indicates how fast the car is travelling as it drives through the red light.

Section 4: Writing

5 Complete the report testing a steel wire for a suspension bridge cable. Use the information in the chart.

Aims of test

(43) will steel wire stretch when pulled?

(44) breaking point?

Test procedure

(45) fasten one end of wire to hook in rigid steel beam

(46) attach 1.2 tonne weight to other end of wire

(47) add more weights up to 1.8 tonnes

Test results

(48) no stretch between 1.2 and 1.49 tonnes

(49) stretch, no break between 1.5 and 1.69 tonnes

(50) break at 1.7 tonnes

Recommendations

(51) use < 1.4 tonne per wire

(52) do not use > 1.4 tonne per wire

Report on test of steel wire for suspension bridge cables

Aims of test

43. One purpose of this test was to discover ___________________________________ .

44 The other aim of the test was_____________________________________________.

Procedure

45. First, one end of the wire was ___________________________________.

46. Next, a 1.2-tonne weight ______________________________________________.

47. Then more weights _____________________________________________________.

Results of test

48. Between 1.2 and 1.49 tonnes, the wire ___________________________________.

49. Between 1.5 and 1.69, it _____________________________________________.

50. When 1.7 tonnes __________________ , the wire _________________________.

Recommendations

51. For weights below 1.4 t, this steel wire ___________________________________.

52. However, above 1.4 t, the wire ________________________________________.