- •G. Zayonchkovsky, V. Stadnychenko, y. Golovko «hydraulic machines and hydraulic/pneumatics equipment»
- •Introduction
- •Pump glossary
- •1.2 Pump history
- •1.3 Pump family group
- •1.3.1 Centrifugal pumps
- •1.3.2 Reciprocating pumps
- •1.3.3 Pump selection
- •2.1 Centrifugal pumps
- •2.2 Centrifugal pump characteristics
- •2.3 Performance modifications for varying pipelene applications
- •2.3.1 Cavitation
- •2.3.2 Net positive head
- •2.3.3 Net Positive Suction Head Avaible
- •2.3.4 Net Positive Suction Head Required
- •2.3.5 Correcting for Inadequate Suction Conditions
- •2.3.6 Npsha-nphsr Criteria
- •2.3.7 Viscous Liquids
- •2.3.8 Minimum Flow
- •2.3.9 Temperature Rise
- •2.3.11 Centrifugal Pump Station Piping Design
- •2.3.12 Centrifugal Pump Nozzle Loading
- •2.3.12 Pump Operational Hazards and Risk
- •3.1. Rotary
- •3.2 Types of rotary pumps
- •3.3 Reciprocating pumps
- •3.4 Piston pumps
- •4.1 Role of compression in a gas pipeline network
- •4.2 Gas pipeline hydraulics principles
- •4.3 Friction factor
- •4.4 Flow regimen profiles calculation
- •4.4 Pipeline design and optimization
- •4.4.1 Optimization Parameters
- •Optimization Process Overview
- •4.4.3 Selection of Alternative
- •4.4.4 Sensitivity Analysis
- •4.4.5 Pipeline Looping & Compression (Location & Spacing)
- •Hydraulics Simulations
- •4.4.7 Compressor Operation Costs
- •5.1. Pneumatic piping, hoses and connections
- •5.2 Flow control and pressure regulation valves
- •5.3 Relief valves dynamics
- •6.1 Linear actuators
- •6.2 Construction
- •6.3 Mounting arrangements an cylinder dynamics
- •7.1 Station piping layout
- •7.2 Scrubbers and filters
- •7.2.1 Dry scrubbers
- •7.2.1 Wet scrubbers
- •Categorization of wet scrubbers
- •Advantages and disadvantages
- •7.2.3 Filters
- •7.3 Gas coolers
- •7.4 Absorbers and regenerators
7.2.3 Filters
The filter-separators (7-4) are designed for increase of purification degree of natural gas from mechanical impurities and drop liquid, which are reasons for erosion of process equipment and compressor station pipelines. Filter-separators are developed for gas capacity ranging from 5 to 25 MMSCMD.
|
|
|
|
The delivery set consists of:
filter-separator;
the cubic vessel;
servicing platforms, process pipelines with shut-off, control valves;
instruments.
The filter-separator shell is divided into two process sections: section with filtering elements, designed for solid particles filtration and liquid coagulation; section with separation nozzle of gauze cartridge, designed for drop liquid separation.
The sets are equipped with instruments allowing to control parameters of in-going gas, purification process and level of separated liquid. Separated liquid drain out of cubic vessel is made automatically. To prevent liquid freezing the cubic vessel is equipped with heating coil. Capacity increasing is reached by parallel installation of several separators. The equipment is mounted on open platform and can be operated in different climatic zones. Filter-separators can be developed upon Customer's initial requirements.
|
|
7.3 Gas coolers
7.4 Absorbers and regenerators
