2.3.3 Real-time live image surveillance.

Live image & the image information is shown together on the image display area.

The user can see the site name & camera name (registered in the DVR) in the upper-

left side, the resolution in the bottom-left side, and “Live” in the upper-right side.

2.3.3.1 Screen division

The user can select the screen division mode among 1, 4, 6, 8, 9, 10, 13, & 16

channel modes.

2.3.3.2 Auto-rotation

The displayed screen is automatically rotated as the currently displayed

division mode.

For example, if the user operates this function while 4 channel screen division mode,

the screen will be automatically rotated in the divided screen as 4 parts.

2.3.3.3 Next screen

The screen moves to the next channel in 1 channel mode and in 4 channel

mode or more, the screen will go to the next 4 channel or more mode.

For example, if the user watches 1~4 channels in 4 channel mode and clicks this

button, the screen will go to 4~8 channel.

2.3.3.4 Channel position move

The user can change the channel position by moving the mouse with the left button

pressed (Drag & Drop).

2.3.3.5 Audio data playback

If the searched data includes audio data, the user can play back it also, through the

web browser.

2.3.4 Sensor, Relay display part

This part shows the sensor and relay status.

If the sensor or relay operates, the icon color is changed. (Sensor : red, Relay : blue)

2.3.5 Camera selection

The user can select a camera by click on the image display area or the camera button

in the bottom side of the screen.

2.3.6 Ptz control

Control the PTZ on the PTZ control part after selecting a channel on the screen.

If the PTZ is being controlled in the DVR system, the remote PTZ control function does

not operate.

2.3.7 Search & playback

The user can find the setting box to play back the recorded data in the DVR by click

the right button of the mouse, after selecting a channel on the screen.

If the user wants to disconnect, select “Disconnect channel”, and wants to connect,

select “Connect channel”.

Select the camera to see in the above setting box.

Then check “Real time mode” or “Search mode”.

If the user wants to search & play back the recorded

data, check the “Search mode” and choose the date

& time.

3

Chapter

RS Program Modem Connection

■ 3.1. Dial-up Connection server setting

■ 3.2. Dial-up Client setting

■ 3.3. RS program modem connection

3.1 Dial-up Connection server setting

- Dial up connection sever setting for modem connection is proceeded as below.

1. Click button to enter the environment setup mode.

2. Click the “Modem setting” button in the [Network] part.

3. The window for Dial up connection sever setting will be floated up.

4. Click “Create a new connection”.

5. Execute “New Connection Wizard”.

6. Select “Set up and advanced connection” in the network connection type page.

7. Select “Accept incoming connection”.

8. Select the currently set modem in “Devices for incoming connections” page and

click “Next”.

9. Select “Do not allow virtual private connections”.

10. Basically the user should check the Administrator, and new user can be added with

new ID & password.

Adding new user

Click “Next” button.

Then click “properties” after selecting “Internet Protocol (TCP/IP)”.

11. Network setting – TCP/IP User IP address setting

The user can set the IP address that will be given to the Dial-up connecting clients.

Select “Specify TCP/IP addresses.

From : IP address for this DVR server

To : IP addresses for the clients that connect to the DVR server.

[NOTICE]