- •Введение
- •Lesson 1 Part 1 Should and Would
- •Practice
- •Vocabulary
- •Texts for educational purposes Buckminsterfullerene
- •Inorganic compounds of carbon
- •Organic compounds of carbon
- •Introduction.
- •Lesson 2 Part 1 Attributive chains (ac)
- •Practice
- •Part 2
- •Alkali Metals
- •Vocabulary
- •Chemical bond
- •Texts for educational purposes Clay and its minerals
- •Potassium and its compounds
- •Lesson 3 Part 1 Ways of the Translation of Passive Voice
- •Practice
- •Part 2
- •Alkaline-Earth Metals
- •Vocabulary
- •Texts for educational purposes Calcium and its compounds
- •Solution and solvation
- •Lesson 4 Part 1 How to Translate “to follow” and its derivatives
- •Practice
- •Part 2
- •Bismuth
- •Vocabulary
- •Lead and its compounds
- •Oxidation-reduction reactions (redox)
- •Oxygen and ozone
- •Lesson 5
- •Practice
- •Part 2
- •Vocabulary
- •Texts for educational purposes
- •Iron and its compounds
- •Nickel and its compounds
- •Transition elements
- •Lesson 6 Part 1 Participle II
- •Practice
- •Part 2
- •Aluminium
- •Vocabulary
- •Сhloride aluminium
- •Texts for educational purposes Colloids
- •Flocculation
- •Dipole and dipole-dipole interaction
- •Texts from scientific articles Journal of Electroanalytical Chemistry
- •Introduction
- •Lesson 7
- •Dependent Participle Constructions
- •Practice
- •Part 2
- •Ammonia
- •Vocabulary
- •Texts for educational purposes Synthesized and natural compounds of nitrogen
- •On acids and their properties
- •Texts from scientific articles Journal: Analytica Chimica Acta Oxidizing properties of Perchloric Acid solution
- •Introduction
- •Journal: Analytica Chimica Acta Oxidation of Cerium (III) to Cerium (1v)
- •Lesson 8 Part 1 Absolute Participle Constructions
- •Practice
- •Part 2
- •Electric - field - induced flame speed modification
- •Vocabulary
- •Fullerene production
- •Text from a scientific article Journal: Progress in Energy and Combustion Science Flame configurations
- •Introduction
- •Lesson 9 Part 1 Gerund
- •Techniques for gerund translation
- •Practice
- •Part 2
- •Fine particle toxicity and soot formation
- •Vocabulary
- •Fine particle toxicity and soot formation
- •Texts from scientific articles Journal: Progress in Energy and Combustion Science Studies of aromatic hydrocarbon formation mechanisms in flames
- •Introduction
- •Lesson 10
- •Functions of the Gerund in a Sentence
- •Practice
- •Part 2
- •Electroanalysis with chemically modified electrodes
- •Vocabulary
- •Utility of chemically modified electrodes
- •Texts for educational purposes Electrochemical processes
- •Lesson 11 Part 1 The forms of the Gerund
- •Practice
- •Part 2
- •Vocabulary
- •Texts for educational purposes Types of fuel
- •Classification of fuels
- •Absolute gerundial constructions
- •Vocabulary
- •Practice
- •Part 2
- •Hydrogen bond
- •Vocabulary
- •Texts for educational purposes Noble gases
- •Equilibrium and equilibrium constant
- •Ammonium hydrogen carbonate
- •Practice
- •Part 2
- •Blast furnace
- •Voсabulary
- •Texts for educational purposes Types of burner
- •Catalytic reactions
- •Lesson 14 Part 1 The Forms of The Infinitive
- •Part 2
- •The rusting of metals
- •Vocabulary
- •Scientific Research Carbon cycle
- •Carbon dating
- •Acid rain
- •Lesson 15 Part 1
- •Infinitive constructions
- •Part 2
- •Alloys and types of alloys
- •Vocabulary
- •Texts for educational purposes On combustion and flame
- •Hardness of water
- •Hydrogen
- •Hammett equation
- •Albert Einstein
- •Vocabulary
- •Список литературы
Texts from scientific articles Journal: Analytica Chimica Acta Oxidizing properties of Perchloric Acid solution
Introduction
The oxidizing properties of hot concentrated perchloric (chloric (VII)) acid are well known. From the oxidations performed the reduction potential of the boiling perchloric acid-water azeotrope is estimated to be +2.0 V. As noted by Smith, this suggests the possibility of using this reagent to oxidize cerium to the tetravalent state. However, no suitable procedure has been published. Indeed, cerium is not oxidized to the tetravalent state by boiling with perchloric acid alone, a fact utilized by O’Laughlin to determine chromium in a chromium-cerium-uranium alloy. Although a faint yellow color appears in cerium solutions during boiling with perchloric acid , the solution becomes colorless when it is cooled and or diluted with water. However , if a small amount of sulphuric (VI) acid is also present, rapid oxidation occurs , indicated by the appearance of the characteristic red-orange color of cerium(IV). This paper presents a satisfactory procedure and optimum conditions for the oxidation of cerium(III) to cerium(1V) using a mixture of hot concentrated perchloric and sulphuric (VI) acids. The procedure is potentially useful for the oxidimetric determination of cerium as well as for the preparation of cerium (IV) solutions that are free of foreign cations and of anions other than sulphate and perchlorate.
67
Journal: Analytica Chimica Acta Oxidation of Cerium (III) to Cerium (1v)
Reagents and equipment.
Cerium (IV) sulphate solution, 0.1 N . A stock solution of cerium (IV) sulphate was prepared by slurring 438.6 g of primary standard grade ammonium hexanitratocerate (IV) in 450 ml of concentrated sulphuric (VI) acid and slowly diluting with water to 8:1 while stirring vigorously. After standing for 2 days a significant amount of precipitate formed, and the solution therefore was decanted. It was standardized against arsenious oxide using osmium tetroxide (osmium (IV) oxide) as a catalyst, and against electrolytic iron, and found to be 0.1000 N. This value was confirmed by subsequent restandardization at intervals throughout the work.
Oxidations were carried out in 300 ml conical flasks equipped with special condenser heads to prevent loss of material by spattering and reduce the escape of perchloric acid into the atmosphere by condensing the vapours in the neck of the flask.
Samples containing 4-5meq of cerium were taken for each oxidation so that subsequent titrations could be carried out using an ordinary 50-ml Normax burette. The same burette was used for both titrations and measuring sample solutions to eliminate errors in glassware calibration.
Lesson 8 Part 1 Absolute Participle Constructions
An absolute participle construction - is an independent sentence which is marked by commas and has a subject followed by a predicate. This construction is translated by a subordinate clause. If it is placed at the beginning of a sentence it is translated by a subordinate clause with the conjunctions: “так как”, “когда”, “если”, “хотя”, “после того как” and etc. E.g.: The choice having been made, all the other alternatives have been rejected - После того, как выбор был сделан, все другие возможности были отвергнуты. If the construction is placed at the end of a sentence it is translated by a subordinate clause with the conjunction: “причем”. E.g.: We carried out a series of reactions, the raw materials brought from laboratory - Мы провели серию реакций, причем исходные материалы были взяты из лаборатории. Sometimes absolute participle constructions can be introduced with the conjunction: “with” and be translated with a subordinate clause with conjunctions: “когда”, “причем”, “так как”. E.g.: With water being cooled, the rate of reaction is low - Когда воду охлаждают, скорость реакции ниже. “With” has a few meanings: 1) с; 2) путем, с помощью; 3) в зависимости; 4) в случае; 5) в соответствии. Along with - наряду с, with an exception - за исключением; with no exception - без исключения, with regard to - относительно.
Vocabulary
68
binding power - способность к образованию связи
mean - среднее значение
dative π bonds- донорные π связи
preheater - предварительный нагреватель
Grignard reagent - реагент Гриньяра
carboxylic acids - карбоновые кислоты
to seek - притягивать
