Добавил:
Upload Опубликованный материал нарушает ваши авторские права? Сообщите нам.
Вуз: Предмет: Файл:
(п)EnergyEcology.doc
Скачиваний:
8
Добавлен:
01.04.2025
Размер:
204 Кб
Скачать
☆

Principles of Operation

An introduction to the phenomenon of thermoelectricity is necessary to understand the operating principles of thermoelectric devices.

Seebeck Effect

In 1821 the German physicist Thomas Johann Seebeck discovered that when two strips of different conductors (metals, semimetals, or semiconductors – the distinction was not understood at that time) were joined together at their ends and separated along their length, a magnetic field developed around the two legs, provided however that a temperature difference existed between the two junctions. He published his observations the following year, and the phenomenon came to be known as the Seebeck effect. The significance of his discovery notwithstanding, Seebeck did not correctly identify the cause of the magnetic field. The magnetic field results from an equal but opposite electric current in the leg of each metal strip caused by a thermally generated electric potential difference between the junctions. If one junction is broken but the temperature differential is maintained, current no longer flows in the legs but a voltage can be measured. This generated voltage, V, is the Seebeck voltage and is related to the difference in temperature, ∆T, between the heated junction and opened junction by a proportionality factor, α, called the Seebeck coefficient, or V = α∆T. The value for α is dependent on the types of material at the junction.

Major Types of Thermoelectric Generators

Thermoelectric power generators vary in geometry, depending on the type of heat source and heat sink, power requirement, and intended use. In general, many units require a power conditioner to convert the generator output to a usable voltage value. Although the Soviet army used these devices to power portable communications transmitters during World War II, modern power generators are based on the substantial improvements made in semiconductor materials and electrical contacts between 1955 and 1965, as well as on engineering improvements achieved up to the present.

Fossil-Fuel Generators

Units have been constructed to use natural gas, propane, butane, kerosene, jet fuels, and wood, to name but a few heat sources. A 500-watt multifuel, maintenance-free tactical power generator for advance area application has been developed for the U.S. Army. Commercial units are in the 10- to 100-watt output power range for use in remote areas. Applications for these units include navigational aids, data collection systems and communications systems, and cathodic protection, which prevents electrolysis from corroding metallic pipelines and marine structures.

Solar-Source Generators

Early attempts to construct solar thermoelectric generators for orbiting spacecraft failed because of low efficiency and higher unit weight compared to silicon solar cells. They have, however, been used with some success to power small irrigation pumps in remote areas and underdeveloped regions of the world where fuel sources are unreliable. In addition, a group of U.S. researchers have described an experimental system capable of using warm surface ocean water as the heat source and cooler deep ocean water as the heat sink for large power generation. Economics favouring this system are based on it being so reliable that there is minimal maintenance cost.