Добавил:
Upload Опубликованный материал нарушает ваши авторские права? Сообщите нам.
Вуз: Предмет: Файл:
GMDSS-GOC-EL7-Oct-2012.doc
Скачиваний:
1
Добавлен:
01.07.2025
Размер:
519 Кб
Скачать
☆

Section-f: Survival Craft Equip & s.A.R.: Key Topic #39: sart- Activation and Survival Craft Operation:

39F1 What indication is given to the personnel in a survival craft of the approach of SAR craft?

A. The Satellite EPIRB will change its strobe light pattern to indicate radar interrogation.

B. The SART informs survivors when the SART switches to the "standby" mode.

C. The SART may provide a visual or audible indication of interrogation by a 3-cm radar.

D. The AIS SART will alarm to indicate that SAR craft with radars are getting close.

39F2 Which of the following would most likely not prevent a SART's signal from being detected?

A. The rescue personnel were monitoring the 3-CM radar and the SART was mounted improperly in the lifeboat.

B. The SART was mounted improperly in the survival craft and rescue personnel were monitoring the 10-CM radar.

C. The rescue personnel were monitoring the 10-CM radar and the SART was properly mounted in the lifeboat.

D. The SART was properly mounted in the lifeboat and rescue personnel were monitoring the 3-CM radar.

39F3 How can a SART's detection and effective range be maximized?

A. The SART should be held or mounted as high as possible and in a vertical position.

B. The SART should be placed in water immediately so it will begin transmitting.

C. Switch the SART into the "high" power position.

D. If possible, the SART should be mounted horizontally so that its signal matches that of the searching radar signal.

39F4 Which statement is NOT true regarding the SART?

A. Responds to interrogations by a vessel's X-Band radar and transmits a signal.

B. This is a 6 GHz transponder capable of being received by a vessel's X-band navigational radar system.

C. This is a 9 GHz transponder capable of being received by a vessel's X-band navigational radar system.

D. Transmits a distinctive 12-blip signal for easy recognition.

39F5 At what point does a SART begin transmitting?

A. It immediately begins radiating when placed in the "on" position.

B. If it has been placed in the "on" position, it will respond when it has been interrogated by a 9-GHz radar signal.

C. It must be manually activated or water activated before radiating.

D. If it has been placed in the "on" position, it will begin transmitting immediately upon detecting that it is in water.

39F6 A SART's signal cannot be detected:

A. In poor visibility, or at night.

B. In heavy seas.

C. By a search vessel's 10 cm Radar.

D. By a search vessel's 3 cm Radar.

Answers: 39F1 - C 39F2 - D 39F3 - A 39F4 - B 39F5 - B 39F6 - C

Section-f: Survival Craft Equip & s.A.R.: Key Topic #40: sart – Radar Display – sar – ais sart:

40F1 How does the searching vessel's radar interrogate a survival craft SART?

A. Activate the IFF interrogation system.

B. The SART responds automatically and transmits the 12-blip signal when it detects the search craft or other vessels' X-Band radar signal.

C. Maintains watch on VHF-FM Ch-70 for the SART's unique identifier.

D. The SART responds automatically when it detects the search craft or other vessel's 10-cm radar signal.

40F2 What radar display changes indicate the correct approach to a SART and what care should be taken in a SAR situation?

A. The line of dots indicate the SART's position, the dots become increasing arcs as the distance to the SART lessens, rescuing vessels should increase speed to reach Distress more quickly.

B. A line of dots on a radar screen rotates to indicate the SART's position along its line of bearing; rescuing vessels should steer for the center of the line of dots.

C. The line of dots indicate the SART's position, the dots become increasing arcs as the distance to the SART lessens, rescuing vessels should reduce speed as the arcs get greater in degree.

D. The line of dots indicate the SART's position, the dots become decreasing arcs as the distance to the SART lessens, rescuing vessels should reduce speed as the arcs lessen in degree.

40F3 How can rescue personnel detect that a SART is transmitting in the immediate vicinity?

A. The DSC unit will react to the SART's signal and respond with the two-tone auto alarm.

B. The SART can provide an approximate location to within a two nautical mile radius, per IMO standards.

C. The SART signal appears as a target which comes and goes; the effect of heavy swells on a SART.

D. The SART's dots on the PPI will become arcs and then eventually become concentric circles.

40F4 What signal is detected as originating from an AIS SART and how is the signal displayed?

A. An AIS SART signal is shown on any AIS receiver as a special MMSI-like coded symbol.

B. The 3-cm radar reflections are converted to AIS signals and displayed on ECDIS/ARPA screens.

C. An AIS SART transmits on AIS frequencies and the signals are converted to 3-cm radar targets for display on 3-cm radars.

D. An AIS SART transmits on 9 GHz so that a 3-cm radar can display the signals.

40F5 How can vessel personnel detect the operation of a SART in its vicinity?

A. A unique two-tone "warbling" signal heard on VHF-FM Ch-70.

B. It will activate an AIS new signal alarm on the AIS receiver.

C. The SART signal appears as a target that comes and goes--due to the effect of heavy swells on a SART.

D. A unique 3-cm signal consisting of a 12-dot pattern radiating outward from a SART's position along its line of bearing.

40F6 What is not an advantage of an AIS SART signal when compared to a radar-based SART signal?

A. The AIS SART can be detected much farther away than radar SART models.

B. Not every AIS transmission needs to be received to achieve an accurate presentation of the location.

C. The AIS SART position has GPS accuracy and transmits on AIS VHF frequencies.

D. AIS SART units may be easier to find in poor radar target conditions.

Answers: 40F1 - B 40F2 - C 40F3 - D 40F4 - A 40F5 - D 40F6 - A

Соседние файлы в предмете [НЕСОРТИРОВАННОЕ]