III. Classic Distortion

The Classic Distortion seems at first to be inferior to the two distortions mentioned above, and maybe it is; but it's worth considering when you need a bit of something different that you can't find with the two above. Its standalone distortion tone is similar to the Tube Drive. But its filtering can be similar to the Screamer.

The trick to reigning in this pedal is to keep things relatively neutral. The bass and treble parameters can be quite extreme. From there, it's all about finding the sweet spot on the Filter control. This parameter is very tricky - turning it up seems to brighten the tone and scoop it simultaneously. I find I usually stay around 50% and often go lower with it, rather than higher.

One thing I like about this effect is that it gets pretty much 100% clean at 0% Drive. This can make it more ideal than the Screamer, which cannot get as clean, for certain scenarios where you want the Screamer filter tone, but you don't want the scratchy high-end, like a soft lead tone.

Top of Amp/Distortion Tone

IV. Overdrive

This is basically a fuzzier version of the Tube Drive. The break-up is looser and a bit more raucous. I don't really have any purpose where I use this as a filter, but I do use it as a standalone distortion for a fuzz tone. I find I have to give it a little pre-EQ bass boost to get it as dark and fuzzy as I want it. I don't really have anything else to say about it.

Top of Amp/Distortion Tone

V. Facial Fuzz

I'm not really into fuzz tones, but I do use this occasionally, particularly for a Hendrix or Eric Johnson tone. I find the key is to mix it with some Marshall amp distortion and give it medium gain. It mostly affects the break-up and looseness of the feel to your playing, while the amp distortion provides the real distortion flavor. I don't find it does much when used solely as a filter, and it's too crazy for my tastes when used as a standalone distortion. I also perform some EQ after the distortion to trim off some of the nasty low and high-end this thing produces, otherwise I get a muddy and gritty amp tone.

Top of Amp/Distortion Tone

VI. Line 6 Distortion

This is the best distortion effect for standalone, high-gain distortion. I use it to simulate 90's Randall amp tones - it has that solid-state kind of tone where it seems unnaturally responsive and crunchy with no flub. I do like to pre-EQ it to add a little more midsy crunch and djent to it.

The difficult thing is finding a good amp to pair this with. I've had good results with some of the Marshalls, but you have to give them a little pre-amp Drive or the tone is weird - it almost gets a little fuzzy like the amp is struggling to work properly. Other good options are the Fender Blackfaces or the Divided by 13. The main thing to watch out for is excessive bass and treble. It's almost best to start with mids at 100% and everything else at 0% and work towards a natural-sounding tone. You're likely only going to be able to get so far, then use EQ effects to really shape things into a natural tone.

Top of Amp/Distortion Tone