Добавил:
Upload Опубликованный материал нарушает ваши авторские права? Сообщите нам.
Вуз: Предмет: Файл:
imo_smcp.doc
Скачиваний:
3
Добавлен:
01.07.2025
Размер:
1 Мб
Скачать
☆

1.4.7 Dtg (date, time, utc)

Time

The twenty-four hour clock system should be used in expressing time in the Maritime Mobile Service indicating whether UTC, zone time or local time is being used. It should be expressed and transmitted by means of four figures, the first two denoting the hour past midnight and the last two the minutes past the hour. Some examples of time using the twenty-four hour clock system are shown below:

Some Times as Expressed by Radiotelephone

TIME EXPRESS AS:

12;45 a.m. 0045 ZERO ZERO FOUR FIVE

12:00 noon 1200 ONE TWO ZERO ZERO

12:45 p.m. 1245 ONE TWO FOUR FIVE

12:00 midnight 0000 ZERO ZERO ZERO ZERO

1:30 a.m, 0130 ZERO ONE THREE ZERO

1:46 p.m. 1345 ONE THREE FOUR FIVE

8:30 P.M. 2030 TWO ZERO THREE ZERO

Co-ordinated Universal Time (UTC) (previous known as Greenwich Mean Time GMT) is normally used in radiocommunications, and the letter Z is an accepted abbreviation for UTC, for example, 052OZ, 214OZ.

DTG = date, time, UTC

Date

Where the date, as well as the time of day, are required to be shown (as in the radio log or a message preamble), a six (6) figure group should be used. The first two figures indicate the day of the month, the following four figures indicate the time.

e.g. 120542 (= 12th day of the current month, time: 05 hours 42 minutes)

1.4.8 Position

  1. Geographical position (latitude and longitude) is to be expressed in degrees and minutes (plus decimals of a minute if necessary), north or south of the Equator and east and west of Greenwich.

e.g. : GP = 15.25 N, 31.20 W

POSITION: LATITUDE ONE - FIVE DEGREES TWO - FIVE MINUTES NORTH,

Longitude zero - three - one degrees two – zero minutes west

e.g.: "WARNING. Dangerous wreck in position 15 degrees 34 minutes North 061 degrees 29 minutes West."

  1. Bearing and distance: True bearings are to be given from an object followed by distance in NM or fractions of a mile. Use the words: BEARING and DISTANCE.

e.g. POSITION: BEARING 0 - 9 - 5 DEGREES TRUE FROM CAPE MARCO,

DISTANCE 2 DECIMAL 6 MILES

Do not say:

POSITION: BEARING 0 - 9 - 5 DEGREES TRUE,

DISTANCE 2 DECIMAL 6 MILES FROM CAPE MARCO

e.g.: "Your position bearing 137 degrees from Big Head lighthouse

distance 2.4 nautical miles."

  1. Reference to a navigation mark: The order direction . distance - progress - name of mark should be followed. Use points of the compass (North, Southeast); useful phrases: NORTH OF, SOUTH OF; PASSING, APPROACHING, BETWEEN, NEAR, LEAVING:

e.g. POSITION: SOUTHWEST OF KALIFRONT POINT

e:g: APPROACHING BUOY NUMBER: BRAVO 1 - 2

  1. Reporting (way) points (hyperbolic navigation systems)

  2. Electronic position fixing (Loran C, Omega etc.)

Bearings

Use the 360 degrees notation from true north (except in the case of relative bearings). Bearings may be taken either for a ship or a navigational mark:

e.g. PILOT BOAT BEARING 2 - 1 - 5 DEGREES FROM YOU

Relative bearings: bearings relative to the vessel's head or bow (starboard or port bow):

Relative bearings can be expressed in degrees relative to the vessel's head. More frequently this is in relation to the port or starboard bow.

e.g: "Buoy 030 degrees on your port bow."

Relative D/F bearings are more commonly expressed in the 360 degree notation.

e.g. BUOY CHARLIE 1 - 1- 0 DEGREES TO YOUR STARBOARD BOW

Соседние файлы в предмете [НЕСОРТИРОВАННОЕ]