Добавил:
Upload Опубликованный материал нарушает ваши авторские права? Сообщите нам.
Вуз: Предмет: Файл:
для магистров II курс .doc
Скачиваний:
0
Добавлен:
01.07.2025
Размер:
4 Мб
Скачать
☆

Comprehensive check

Task 1. Answer the questions.

  1. Who commissioned the project?

  2. How are the temperature stresses minimized?

  3. What is the main function of the scale effect?

  4. What does the main load-bearing system consist of?

  5. What does the walkway system serve for?

  6. How many drive stations are used to open the mobile roof?

  7. What is the total capacity of the Friends Arena?

Task 2. Decide whether these sentences are true or false. Correct the false ones.

  1. The mobile roof consists of four parts.

  2. The mobile roof is equipped with a large number of installations, such as lighting, electricity, ventilation, monitoring and etc.

  3. This project witnesses new ideas and innovative technologies.

  4. The stadium was renamed after a nonprofit organization.

  5. It takes people less than 10 minutes to open and close the retractable roof.

  6. The roof is supported by a total of 60 short pillars.

  7. The total weight of the retractable roof is more than 800 tonnes.

  8. The attendance can follow what is happening at the stadium from a 240m2 big media cube placed between grandstands.

Task 3. Match the following English words to the Russian equivalents.

  1. suspend

  2. retractable

  3. venue

  4. grandstand

  5. scale effect

  6. treadway

  7. walkway

  8. roofing sheet

  1. трибуна

  2. колея

  3. кровельная панель

  4. вешать, подвешивать

  5. спортивный объект

  6. съемный

  7. масштабный эффект

  8. раздвижной

  9. мостки на крыше

Task 4. Find words in the text that mean:

  1. It can be moved or pulled back into the main part of something.

  2. The place where an activity or event happens.

  3. To make something smaller in size, amount etc. than it used to be.

  4. To hang something from something else.

  5. The number of things or people that a container or a space can hold.

  6. The amount of weight or pressure that something has to bear.

  7. A flat area of ground for playing particular sports.

  8. A thick strong upright post that supports part of a building.

  9. Systems installed on the roof to allow technicians to gain safe and convenient access to varying roof levels.

  10. A large structure with rows of seats from which people watch sports events.

Language activity

Task 5. Replace the words and phrases in italics with phrasal verbs from the box.

speed up, carry out, bring down, slow down,

let in, take up, put off, let out, keep down

  1. We have got to (1) reduce the gas pressure quickly to just above zero and we need to (2) maintain it at that low level for as long as we can.

  2. The chief engineer has decided not to (3) do the equipment test today, but to (4) postpone it until tomorrow because it will (5) consume too much time.

  3. You must (6) decelerate the motor by a few rpm for a moment and then (7) accelerate it again by the same number of rpm.

  4. The valve at the top of the tank (8) allows the fluid to enter, while the one at the bottom (9) permits it to escape.

Task 6. Complete the test description using the nouns in the box.

absorbency, ductility, durability, malleability,

flammability, rigidity, frost resistance, permeability

  1. The … test determines the ability of materials to catch fire, to release heat, and to develop smoke under test conditions.

  2. In the … test, pieces of different materials were weighed before and after the test. Water was added and volumes of water taken in by the materials were calculated from the weight increase.

  3. In the … test, the plastic laminate is rubbed continuously by an abrasive wheel. The material is examined every 10 hours, and the deterioration of the material is measured. This testing provides an estimate of the plastic product’s lifetime span.

  4. The … test was carried out by means of a tensile test. A wire was stretched to breaking point, and the percent of elongation (lengthening) was calculated. After the test, the wire retained its changed shape when the load was removed.

  5. The … test is similar to a flexibility test. A material is placed repeatedly under increased loads. The test determines whether any bending can be measured, and if so, how much.

  6. In a test of …, a sheet of the test material is placed on a doming block and is hit repeatedly with a metal punch. The test determines whether the material can be permanently deformed by compression into a new shape without cracking or tearing.

  7. In a test of …, materials have to undergo hours-long warm and cold baths alternating between -20°C and +20°C 56 times.

  8. In a test of …, Water is forced by a known constant pressure through a soil specimen and the rate of flow is determined.

Task 7. Write the adjectives in the box on the correct line.