- •1 Level (6 points)
- •History of the need for building materials
- •Cement production in the Republic of Kazakhstan
- •The history of obtaining and production cement
- •Economics of cement production
- •Determination of clinker, cement and additives introduced in the grinding
- •The composition of the raw meal. Equations 1-4
- •The composition of the raw meal. Equations 5-9
- •An overview of phase composition and quality phase of clinker
- •Portland cement clinker.
- •Chemical and mineralogical composition alite
- •Chemical and mineralogical composition of belite
- •Phase aluminate
- •Phase Ferrite
- •Other clinker phases
- •The composition and place of origin of the phases in portland cement clinker
- •Analysis of the raw meal, cement and clinker
- •Microscopic research of clinker
- •Recent developments in the use of X-rays
- •Petrographic analysis of clinker
- •Cement production
- •Raw materials and fuels in cement production
- •The raw materials of cement industry
- •Limestone and clay
- •A natural mixture of clay and limestone
- •Waste and their use in the cement industry
- •2 Level (6 points)
- •Mining, processing of raw materials, grinding of raw meal and homogenisation.
- •The blending warehouse of raw materials and its functions.
- •Development of the pile by rotary excavator
- •The process of burning cement clinker. General concepts
- •Chemical reactions during heat treatment of portland cement raw meal (main reaction clinker burning)
- •The dehydration of kaolinite
- •The reactions during the sintering
- •Reaction with cooling
- •Homogeneity of the raw meal
- •The process of burning cement clinker
- •Procedures for burning cement clinker
- •Decarbonizators with upward vertical gas flue.
- •The fuel in cement production
- •Clinker cooler
- •Cooler sf (Smidth-Fuller).
- •Storage of clinker
- •Cement Grinding
- •Milling equipment
- •The fineness of grinding and particle size distribution (grain) composition of the cement
- •Storage, packing, shipment cement to the consumer
- •The granulated blast furnace slag (s)
- •Pozzolan (p, q)
- •Natural pozzolanic additives (р)
- •Natural volcanic pozzolanic additives (q)
- •3 Level (8 points)
- •Fly ash rich in silica (V)
- •Lime ash dust (w)
- •Calcined shale (t)
- •Limestone (l, ll)
- •The quartz dust (d)
- •Small components
- •Calcium sulphate
- •The cement admixture
- •Cement according to standard
- •Physical and chemical properties of cements according to European standard
- •Cements with special properties
- •Well cement
- •Hydration
- •The reaction of silicates (c3s, c2s)
- •Hydration c3s
- •Hydration c2s
- •Reactions of hydration aluminate without participation of sulfates
- •Reactions hydration aluminate with participation sulphates
- •Hydration ferrite (c4af)
- •Taylor Model
- •Model Stark
- •The cement hydration
- •Reaction of the secondary components
- •Hydration of cement containing granulated slag
- •Reactions pozzolanic materials
- •4 Level (8 points)
- •Slowing solidification
- •Structure of a cement stone
- •Building lime
- •The historical and economic situation. Raw material deposits
- •Production and processing of limestone
- •Burning lime
- •Shaft kiln to coke (coal) and gas fuel
- •The rotary tube kiln
- •Counter current regenerative kiln (ggr-kiln)
- •Shaft ring kiln
- •Grinding and shipment of burnt lime
- •Slaked lime
- •The use of lime products
- •The requirements of stst 9179-79 to building lime
- •Gypsum. History and economy
- •Physical and chemical bases of gypsum binders
- •Phases in the system CaSo4 - h2o
- •The crystal structures, double salts, mixed crystals
- •Natural gypsum, natural anhydrite
- •The chemical gypsum
- •Uddg- gypsum
- •Production of calcium sulphate binders
- •Technological processes in the production of calcium sulphate binders
- •Autoclave method for producing α-hemihydrate
- •Gypsum boiling kettle for the production of ß-hemihydrate
- •5 Level (12 points)
- •The high temperature burning of gypsum method (multiphase gypsum) on the grate
- •Properties capable of hardening calcium sulphates
- •Hydration CaSo4-binding
- •Natural -, uusdg - and chemical anhydrite
- •The properties of the treated gypsum building materials
- •Other areas of application
- •The norms, chemical analysis and phase analysis
- •Gypsum Products
- •The requirements of gost 125-79 for the quality of construction gypsum
- •Other inorganic binding materials
- •Alumina cement
- •Production of alumina cement
- •Chemical and mineralogical composition of the alumina cement
- •Areas of use alumina cement
- •Softeners (plasticizers), added during the production concrete
- •Softeners (plasticizers), added to the concrete mix
- •Concrete
- •Mobile concrete plants
- •Concrete for precast concrete elements
- •Self-compacting concrete
- •Building mortar
- •Cement mortar
- •Plaster
- •Cementing deep wells
Concrete
Concrete artificial stone material consisting of a mixture of hardened binder (with water, at least - without it) and fillers. The mixture is specially selected or calculated to ensure obtaining the desired properties of the concrete. The concrete mixture is thoroughly mixed in concrete mixers, fit into molds or formwork and compacted mehanizirirovannymi different ways (by vibration, etc.). It hardens concrete mix in the natural (atmospheric) or artificial conditions of heat and humidity.
A concrete one in the main building materials. It is widely used for the manufacture of precast concrete components, large panels, blocks, etc. Products, as well as for the erection of precast-monolithic and monolithic concrete and reinforced concrete structures. There are many species and varieties of concrete. Depending on the type of binder distinguished: concrete cement (the most common), lime, gypsum concrete, asphalt, etc. plastbeton Aggregates used in concrete are divided into melkie- sand, and large - gravel or crushed stone..
With regard to the cement concrete, the most common classification for volume weight, which is associated with other important properties of concrete - density, strength, thermal conductivity, etc. The following types of concrete are distinguished depending on the volume weight..:
1) Particularly heavy concrete - volumetric weight of more than 2500 kg / m3, the concrete with a very dense structure containing special tvzhelye aggregates of steel, iron ore, barite, etc. It is used for protection against rays pronikvovenmya in nuclear power plants;.. for simultaneous protection against the penetration of neutrons; this concrete must also include the greatest possible amount of hydrate, t. e. chemically bound water.
2) Concrete tyazhelyy- bulk density of 1800- 2500 kg / m3 (usually approx. 2200-2400 kg / m3). The most common (ordinary) type of concrete, especially widely used in concrete and reinforced concrete structures and buildings. It has a sufficiently dense structure and contains a filler of solid rocks.
B) Light concrete - volumetric weight of 500- 1800 kg / m3 contains light (porous) natural or artificial aggregates. The most common varieties of lightweight concrete: slag concrete, expanded clay lightweight concrete, pumice concrete, termozitobeton (with slag vemzoy) tufobeton. The structure of the lightweight concrete is dense enough. PIiroko used for the manufacture of large blocks and wall panels, and to overlap. For lightweight concrete relates cellular concrete.
4) Concrete particularly easy - volumetric weight of less than 500 kg / m3. These concretes are cellular concrete - concrete, foam concrete, the lightest large pore - perlitobeton and vermikulitobeton etc. With bulk density 700-1200 kg / m3 of concrete are structural and thermal insulation and used for the manufacture of large wall panels and blocks for reinforced covering buildings.; most lightweight concrete with bulk density of 400-500 kg / m3 is used insulation material for thermal insulation coatings of buildings and walls.
Frost resistance is required for concrete structures located in respective atmospheric conditions. For the walls of conventional buildings of concrete should withstand 15 times the standard test for alternating freezing and thawing - frost resistance of 15 cycles; Concrete outer parts of hydraulic structures frost should reach up to 500 cycles (depending on climatic conditions).
Water resistance of concrete required in waterworks, pressure pipes, tanks, and so on. N., Provides a dense structure of concrete and special. additives, water resistance is tested to twice the long-term operating pressure at the concrete layer no thicker than 15 cm.
concrete Thermal conductivity is of great importance for the walls of buildings and pavements; it into account when calculating their thickness. Thermal conductivity is related to the concrete structure. The values of its range widely: from 0.10 (in the most lightweight cellular concrete) and 1.0 kcal / m.chas.grad (conventional heavy concrete).
All lightweight concrete have a thermal conductivity less than 0.70.
Shrinkage of the concrete is a decrease in volume of the concrete hardening it to the air, which can cause cracking in large structures. To prevent shrinkage arrange special. joints in buildings, provide hardening concrete (cement) in the first days after laying in wet conditions.
